Conversations
My Conversations
What's New
What's Popular
The Consumer Products Safety Commission's "Most Wanted" list
According to the US Consumer Products Safety Commission, below is a list of their "most wanted" recalls.
Please share this with other parents if you can...you never know who may have one of these sitting in their house.
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Kolcraft Enterprises Inc., of Chicago, Ill., is voluntarily recalling about 425,000 infant play yards following the death of a child.
CPSC received a report of a 10-month old boy who strangled on the changing table’s restraint strap that was hanging down into Kolcraft’s “Sesame Beginnings” Travel Play Yard where the child was located.
Twelve different Kolcraft play yards are included in this recall. All of the play yards have raised changing tables with a restraint strap that forms a loop beneath the changing table, posing a strangulation hazard to a child in the play yard.
In addition to the strangulation hazard with the changing table restraint strap, one play yard also has a raised cradle that rocks back and forth. A child can roll and get trapped against the side of the cradle in the Contours 3-in-1 Play Yard. If that happens, a child can suffocate. Kolcraft has received 45 reports of children rolling to the side of the rocking cradle attachment.
The recalled play yards were sold in a variety of colors and patterns. Play yards and model numbers included in this recall are listed in the chart below. The model number is printed on a white sticker located on one of the feet of the play yard. They were manufactured in China.
The play yards were sold at retail stores nationwide from January 2001 through September 2007 for between $50 and $130.
Consumers should immediately stop using the changing tables and rocking cradle and contact the firm for instructions on receiving a free non-looped replacement strap for the changing table and a free repair kit to secure the base of the cradle. Consumers should immediately cut off and remove the existing changing table restraint strap. Consumers should always remove the raised changing table and cradle or bassinet before placing a child in a play yard.
A free repair kit for the rocking cradle will be sent to consumers separate from the replacement strap.
For additional information, call Kolcraft at (888) 655-8484 anytime, or visit the firm’s Web site at www.kolcraft.com
NestingConversationStarters | December 16, 2008 | reply
Name of Product: MagnaMan Magnetic Toy Figures
Units: About 1.3 million
Distributor: MEGA Brands America Inc., of Livingston, N.J.
Hazard: Small magnets inside the figures can detach. Magnets found by young children can be swallowed or aspirated. If more than one magnet is swallowed, the magnets can attract each other and cause intestinal perforations or blockages, which can be fatal.
Incidents/Injuries: MEGA Brands and CPSC have received 25 reports of magnets coming loose from the figures. No injuries have been reported.
Description: The recalled MagnaMan magnetic toys are figures that have body parts that attach with magnets. They come in either a “Futuristic Warrior” or “Ancient Warrior” theme. Each figure comes with three accessories.
Name Color Model # Name Model # Alien Green 28170 Robot Assortment 28198 Robotor Red 28171 Vac Metal 28327 Flame Orange 28172 4-Pack 28175 Gigantor Blue 28173 3-Pack 28393 Toyoto the Samurai Purple 28164 2-Pack 28392 Sir Lancelot the Knight Gray 28165 Vac Metal Assortment 28327 Eric the Viking Blue 28166 Assortment 28254 or 28199 Brutus the Gladiator Yellow 28167The model number is printed on the front of the product’s packaging.
Sold at: Wal-Mart, Target, Toys R Us, K-Mart and other toy stores nationwide from January 2005 through December 2007 for about $10.
Manufactured in: China
Remedy: Consumers should stop using the recalled toys immediately and return them to MEGA Brands for a free replacement toy.
Consumer Contact: For additional information, contact MEGA Brands at (800) 779-7122 between 8 a.m. and 6 p.m. ET Monday through Friday, or visit the firm’s Web site at www.megabrands.com
NestingConversationStarters | December 16, 2008 | reply
Playskool received reports that a 19-month-old boy from Martinsburg, W.V., and a 2-year-old boy from League City, Texas, suffocated when oversized, plastic toy nails sold with the tool bench toys became forcefully lodged in their throats. Though the toy nails are not considered a small-part, and the toys are intended for children age 3 and older, Playskool is voluntarily conducting a recall as a precaution to prevent additional incidents.
The Team Talkin' Tool Bench™ is a 20-inch tall plastic toy tool bench with an animated red toy saw, a yellow toy drill and a blue toy vice. The toy talks and makes various sound effects, including tool sounds. The product also includes a toy hammer, screwdriver, two 2¼-inch plastic screws, two 3-inch plastic nails and pieces to build a small toy plane. The red Playskool logo is on the front of the brown surface of the tool bench.
The toy was sold at Toys R Us, Wal-Mart, Target, KB Toys stores and various other stores nationwide from October 2005 through September 2006 for about $35.
Consumers should immediately take the two toy nails away from children and contact Playskool to get information on returning the nails for a $50 certificate for a Playskool (or its related companies') product.
For additional information, call Playskool at (800) 509-9554 anytime, or go to their Web site at www.playskool.com
NestingConversationStarters | December 16, 2008 | reply
WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission (CPSC) is urging parents and caregivers to stop using convertible “close-sleeper/bedside sleeper” bassinets manufactured by Simplicity Inc., of Reading, Pa. CPSC has learned that on August 21, 2008, a 5-month-old girl from Shawnee, Kan. was strangled to death when she became entrapped between the bassinet’s metal bars. This is the second strangulation death CPSC has learned of in the close-sleeper bassinets. On September 29, 2007, a 4-month-old girl from Noel, Mo. became entrapped in the metal bars of the bassinet and died.
CPSC is issuing this safety alert because SFCA Inc., the company which purchased all of Simplicity Inc.’s assets at public auction in April 2008, has refused to cooperate with the government and recall the products. SFCA maintains that it is not responsible for products previously manufactured by Simplicity Inc.
The Simplicity 3-in-1 and 4-in-1 convertible bassinets contain metal bars spaced farther apart than 2 3/8 inches, which is the maximum distance allowed under the federal crib safety standard. The metal bars are covered by an adjustable fabric flap which is attached by velcro. The fabric is folded down when the bassinet is converted into a bed-side co-sleeping position. If the velcro is not properly re-secured when the flap is adjusted, an infant can slip through the opening and become entrapped in the metal bars and suffocate. This warning does not cover bassinets produced in recent months that have fabric permanently attached over the lower bar.
Due to the serious hazard these bassinets pose to babies, CPSC urges all consumers to share this safety warning with day care centers, consignment stores, family and friends to ensure that no child is placed to sleep in a Simplicity convertible bassinet covered by this warning.
The Commission voted, using its new authorities in the Consumer Product Safety Improvement Act, to release this warning upon making a finding that the health and safety of the public require immediate notice.
NestingConversationStarters | December 16, 2008 | reply
ALSO NOTE: Consumers who have participated or have yet to respond to Simplicity’s June 2007 recall of Nursery-in-a-Box cribs are strongly urged to also participate in this recall.
AND ADDITIONALLY: A subsequent recall involving Simplicity drop side cribs has been issued.
WASHINGTON, D.C. - The U.S. Consumer Product Safety Commission (CPSC) is announcing today a voluntary recall with Simplicity Inc., of Reading, Pa., of about 1 million cribs. The drop-side can detach from the crib, which can create a dangerous gap and lead to the entrapment and suffocation of infants. CPSC is aware of two deaths in Simplicity manufactured cribs with older style hardware, including a 9-month-old child and a 6-month-old child, where the drop-side was installed upside down. CPSC is also aware of seven infant entrapments and 55 incidents in these cribs.
CPSC is also investigating the death of a 1-year-old child in a Simplicity crib with newer style hardware, in which the drop-side was installed upside down. CPSC is warning parents and caregivers to check all Simplicity cribs to make sure the drop-side is installed right side up.
The drop-side failures result from both the hardware and crib design, which allow consumers to unintentionally install the drop-side upside down. This, in turn, can weaken the hardware and cause the drop-side to detach from the crib. When the drop-side detaches, it creates a gap in which infants can become entrapped.
CPSC is also aware of two incidents that occurred when the drop-side was correctly installed with older style hardware, though the upside down installation greatly increases the risk of failure.
The recalled Simplicity crib models include: Aspen 3 in 1, Aspen 4 in 1, Nursery-in-a-Box, Crib N Changer Combo, Chelsea and Pooh 4 in 1. The recall also involves the following Simplicity cribs that used the Graco logo: Aspen 3 in 1, Ultra 3 in 1, Ultra 4 in1, Ultra 5 in 1, Whitney and the Trio.
The recalled cribs have one of the following model numbers, which can be found on the envelope attached to the mattress support and on the label attached to the headboard: 4600, 4605, 4705, 5000, 8000, 8324, 8800, 8740, 8910, 8994, 8050, 8750, 8760, and 8996.
The cribs, which were made in China, were sold in department stores, children’s stores and mass merchandisers nationwide from January 1998 through May 2007 for between $100 and $300.
As an immediate precaution, consumers should check to see if the drop-side is installed right side up. To do this, check to see that the slightly rounded rail with the decorative groove is installed at the top and the plain rail is on the bottom. Next, consumers should make sure the drop-side is securely attached to the tracks in all four corners.
Close-up of a Correctly Installed Drop-sideClose-up of an Incorrectly Installed Drop-sideIf the drop-side is installed upside down or not securely attached, consumers should stop using the crib immediately. Incorrect installation can cause permanent damage to the hardware and re-installing the drop-side using the same hardware is unsafe.
Consumers should check to see if their crib contains the recalled hardware. Recalled hardware has a flexible tab at the bottom of the lower tracks and the top of the lower tracks are open. Newer hardware, which is not subject to the recall, has the flexible tab located at the top of the lower track, and a permanent stop at the bottom.
Photo of Older Style HardwarePhoto of Newer Style HardwareConsumers who have a crib with older style hardware can receive a free repair by immediately contacting the firm toll-free at (800) 858-8323 between 8:30 a.m. and 10 p.m. ET Monday through Thursday, between 8 a.m. and 5 p.m. ET on Friday, and between 9 a.m. and 5 p.m. ET on Saturday, or by visiting the firm’s Web site at www.simplicityforchildren.com
NestingConversationStarters | December 16, 2008 | reply
WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission (CPSC), in cooperation with Delta Enterprise Corp., of New York, N.Y., is announcing the voluntary recall today of about 600,000 drop side cribs. The crib’s drop side can detach when the spring peg is not engaged, which can cause an entrapment and suffocation risk to infants and toddlers.
If the spring pegs in the base of each leg of the crib are pushed back into the lower track, the pegs can become nonfunctional. This can cause the drop side to detach from the crib and create a gap that can entrap an infant or toddler.
CPSC staff is aware of a death of an 8-month-old child who suffocated when the drop side of his crib detached. CPSC is also aware of one child entrapment and one incident in which the drop side detached due to a disengaged spring peg.
The recall involves all Delta drop side cribs manufactured prior to 2006 that use “Crib Trigger Lock with Spring Peg” drop side hardware design. The recalled model numbers and country of origin include: 4340, 4343, 4520, 4600, 4620, 4624, 4625, 4629, 4660, 4665, 4720, 4750, 4751, 4850, 4855, 4857, 4880, 4920, 4925-2, 4925-2B, 4925-6, 4980, and 8605. The model number, country of origin and manufacture dates are located on top of the mattress support board. The recalled cribs have Delta’s name and address on the mattress support boards and Delta’s logo on the teether rail.
The cribs, which were made in China, were sold at major retailers nationwide from January 2000 through January 2007 for between $33 and $200. Cribs currently sold at retail are not involved.
CPSC and Delta urge parents and caregivers to immediately stop using these cribs and contact Delta to receive a free, easy-to-install repair kit. Call Delta toll-free at (800) 816-5304 anytime after 5 pm today or log on www.cribrecallcenter.com
NestingConversationStarters | December 16, 2008 | reply
